DS-1LN6U-SC0 – Cat6 U/UTP Ethernet Cable, 23 AWG Solid-Bare Copper, 305 Meters, PVC Sheath
EGP7,425
DS-1LN6U-SC0
| Attribute | Value |
|---|---|
| Cable Type | U/UTP Cat6 PVC 23 AWG Cable |
| Cable Category | Cat.6 |
| Cable Length | 305 meters |
| AWG (American Wire Gauge) | 23 AWG |
| Conductor Material | Solid-Bare Copper (99.95%) |
| Outer Diameter (O.D.) | 6.00 mm ± 0.30 mm |
The DS-1LN6U-SC0 is a high-performance Cat6 U/UTP Ethernet Cable designed for stable and reliable transmission, compliant with ANSI/TIA-568-C.2 and IEC61156 standards. It features a solid-bare copper conductor, ensuring less resistance and better electrical performance. The PVC sheath provides strong mechanical properties, high tensile, and compressive strength, ensuring minimal damage during installation. This cable supports PoE power transmission and offers excellent performance in Fluke 90-meter and 100-meter tests. With a conductor diameter of 0.55 mm (23 AWG), this cable is ideal for high-performance data transmission over long distances.
Key Features:
- Stable Electrical Performance: Compliant with ANSI/TIA-568-C.2, IEC61156, ISO/IEC11801 standards.
- Solid-Bare Copper Conductor: 99.95% purity for better transmission performance.
- PoE Support: Supports up to 57 V/1 A DC power for long-range PoE transmission.
- Fluke Test Verified: Performs excellently in both the 90-meter permanent link test and 100-meter channel test.
- PVC Sheath: Provides strong mechanical protection, tensile strength, and compressive strength.
- Temperature Resistance: Operates in a wide temperature range from -20°C to 75°C (-4°F to 167°F).
- Durability: High tensile and compressive strength, designed to reduce installation damage.
Specification Sheet
| Specification | DS-1LN6U-SC0 |
|---|---|
| Cable Category | Cat.6 |
| Conductor Material | Solid-Bare Copper (99.95%) |
| Conductor Diameter | 0.55 mm (23 AWG) |
| Sheath Material | PVC (Orange) |
| Outer Diameter (O.D.) | 6.00 mm ± 0.30 mm |
| PoE Support | Supports PoE (57 V/1 A DC) |
| Fire Resistance | Not Supported |
| Compliance | ANSI/TIA-568-C.2, RoHS 2.0, IEC61156 |
| Sheath Properties | Tensile Strength ≥ 13.5 Mpa (Before aging) |
| Insulation Material | HDPE |
| Packaging | 400 mm × 400 mm × 240 mm, 12.3 kg, 305 meters per reel |
| Operating Temperature | -20°C to 75°C (-4°F to 167°F) |
| Electrical Characteristics | Impedance: 100 ± 15 Ω, Delay Skew: ≤ 45 ns/100 m |
| Standard | ISO/IEC11801, ANSI/TIA-568-C.2 |
| Cable Type | Network Cable |
|---|---|
| Cable Category | CAT6 |
| Cable Length | 305 meters |
| AWG (American Wire Gauge) | 23 AWG |
| Conductor Material | Solid-Bare Copper (99.95%) |
| Outer Diameter (O.D.) | 6.00 ± 0.30 mm |
Related Products
Uniview 305M CAT6 Ethernet Cable – Model CAB – LC3100B-CCA
| Cable Type | Network Cable |
|---|---|
| Cable Category | CAT6 |
| Cable Length | 305 meters |
| AWG (American Wire Gauge) | 24 AWG |
| Conductor Material | Oxygen-Free Copper (OFC) |
| Outer Diameter (O.D.) | 5.8 mm |
DS-3E0106P-E/M
| Specification | Details |
|---|---|
| Form Factor | Desktop, Wall-mounted |
| Switch Ports | 4 PoE Ports (10/100 Mbps), 2 RJ45 Ports (10/100 Mbps) |
| PoE Ports | IEEE 802.3at/af compliant, 1-4 Ports |
| Port Speed | 10/100 Mbps |
| PoE Support | IEEE 802.3af, IEEE 802.3at |
| PoE Power Output | 30 W per port |
| PoE Power Budget | 35 W Total |
| Bandwidth | 1.2 Gbps |
| Layer | Layer 2 |
| VLAN Support | Not supported |
| Management Type | Unmanaged |
| Transmission Distance | Up to 300 m for PoE Ports |
16 10/10OMbps Fast Ethernet ports
1 Gigabit Combo (RJ45/SFP) uplink port •
150 watts available for PoE •
Flow control for protection against data loss •
Maximum distance of 250m
- Brand : D-Link
- Type : Wireless
- Host Interface :Â USB
- Wireless N 150
- USB 2.0
- Integrated Antenna
- Wi-Fi Protected Access (WPA/WPA2-PSK, WPA/WPA2-EAP)
- Micro USB Adapter
Dual-band
throughput of up to 1167Mbps
IEEE 802.11ac Wave 2 wireless
2 x 2 MU-MIMO over two spatial streams
1 x Gigabit Ethernet port
Phone line port for voice communications
IEEE 802.3af Power over Ethernet (PoE) for tidier
less-wires setup, WPA2â„¢ – WiFi security, Quality of Service (QoS) prioritizes network traffic, Supports up to 16 SSIDs, ACCESS POINT MODE, WIRELESS CLIENT MODE, WDS MODE, WDS WITH AP MODE. 2.4GHZ SPEED : 300MB, 5 GHZ SPEED : 867MB
DS-1LN6-UE-W:
| Attribute | Value |
|---|---|
| Cable Type | Cat.6 U/UTP Ethernet Cable |
| Cable Length | 305 meters |
| Conductor Material | Solid-Bare Copper (99.95%) |
| Conductor Diameter | 0.53 mm (23 AWG) |
| Sheath Material | PVC (White) |
| PoE Support | Supports PoE (57 V/1 A DC) |
| Fire Resistance | Not Supported |
| Compliance | ANSI/TIA-568-C.2, RoHS 2.0, IEC61156 |
ï‚· 8 x 10/100 Mbps Fast Ethernet PoE+ Ports ï‚· 2 x 10/100 Mbps Uplink Ports ï‚· PoE+ support – up to 30W per port ï‚· Long Reach PoE support – up to 250m ï‚· Smart Features: Extend, VLAN, QoS and PoE Reset ï‚· Lightning protection built-in (6kV) ï‚· PoE Budget 96 Watts ï‚· Plug & Play Installation
 DS-3E0109P-E(C)
| Form Factor | Desktop/Wall-Mounted |
|---|---|
| Switch Ports | 9 Ports (8 PoE, 1 RJ45) |
| PoE Ports | 8 Ports (IEEE 802.3af/at) |
| Port Speed | 10/100 Mbps |
| PoE Support | IEEE 802.3af/at |
| PoE Power Output | Max 30W per port |
| Total Power Budget | 115 W |
| Surge Protection | 6 KV |
| Switching Capacity | 1.8 Gbps |
| Management Type | Unmanaged |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Dimensions | 170.0 mm × 27.6 mm × 93.1 mm |
DINTEK’s UK style Wall Plates are made from high-impact ABS plastic, making for years of durable use. These Wall Plates perfectly blend into the decor of your office or home. They accept all keystone insert products from the DINTEK range whether it is a Cat.5e, Cat.6 or Cat.6A.
Features
- Vertical & angled UK style design
- One & two port wall plate options
- Designed for all keystones
- Packing includes wall plate and two mounting screws
Material Construction
- Material: ABS Plastic
- Color: White
| Form Factor | Desktop |
|---|---|
| Switch Ports | 8 Ports |
| Port Speed | 10/100/1000 Mbps |
| Power Input | AC: 100-240V |
| PoE Support | Not Supported |
| Bandwidth | 16 Gbps |
| Layer | Layer 2 |
| VLAN Support | Not Supported |
| Management Type | Unmanaged |
| Power Saving Features | Energy Efficient Ethernet (EEE), Power Saving by Link Status, Power Saving by Cable Length |
| Transmission Method | Store & Forwarding |
Short Description:
The DGS-1008A is an 8-Port Gigabit Desktop Switch that supports Energy Efficient Ethernet (EEE) and Power Saving by Link Status and Cable Length. It provides high-speed connections with Jumbo Frame support of up to 9,720 bytes and features a fanless design for quiet operation.
- 16 10/100/1000Mbps ports
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiation
- Plug & play design
SW-2110-P
| Form Factor | Desktop |
|---|---|
| Switch Ports | 10 Ports |
| POE Ports | 8 Ports (IEEE802.3af/at) |
| Port Speed | 10-100Mbps |
| PoE Support | IEEE 802.3af/at |
| PoE Power Output | 120W total, 30W per port |
| Bandwidth | 2 Gbps |
| Layer | Layer 2 |
| VLAN Support | Supported |
| Management Type | Unmanaged |
| Transmission Distance | Up to 250 meters in Surveillance mode |
The SW-2110-P is a 10-Port PoE Switch featuring 8 PoE ports that support IEEE802.3af/at, delivering a total of 120W power and 30W per port. It offers multiple working modes, including Surveillance mode with an extended transmission distance of up to 250 meters. The switch is housed in all-metal, ensuring reliability and durability.
Out of stock
Reviews
There are no reviews yet.